UD/S 2.300.2 - Dimming actuator bus system 0...500W UD/S 2.300.2 - special offer

EAN: 4016779663069 - manufacturer-number: UD/S2.300.2 - 2-ch dimming actuator UD/S 2.300.2 used with the ABB i-bus® KNX. With this dimming actuator you are able to gate two different lighting groups with a max. capacity of 300W each. On one channel the capacity increads up to 500W. Both channels can supplied on different phases. bulbs can be connected, low-voltage halogen bulbs (with electrical or wound transformers) and 230 halogen bulbs. Due to the automatically load detection, different illuminants can be used. Please note that only within one channel one load typ is allowed. Load detection and mode selection works automatically. This dimming actutator has a max. power dissipation of 4,5W (within full load). power voltage 21-30V DC (bus), max. current consumption 12mA, IP20 protection, protection class II photographed by EIB3D.COM universal dimmer actuator UD/S 2.300.2 The universal dimmer actuator UD/S 2.300.2 can dim two groups of lights with 300 W max. load each. When only one channel is operated, the connected load is increased to 500 W. The low minimum load of 2 W makes this unit suitable for connecting the most varied types of lights. The unit is equipped with two independent output channels. The operation of incandescent lamps, 230 V halogen lamps or l.v. halogen lamps with electronic or conventional transformers is possible. The identification of the type of load is automatic provided this has been pre-set in the parameters. Both channels are independent of one another. They can be connected to different phases and control different types of loads. When connecting l.v. halogen lamps, transformers made by ABB are recommended. Technical data (excerpt) Operating voltage: via ABB i-bus® EIB / KNX Load circuits: 2, dimmed Output load: 300 W / VA, 500 W max. when only one channel is in operation Minimum load: 2 W Operating temperature range: -5°C to 45°C Max. power loss: 4.5 W (at rated load) Terminals: Screw terminals Tightening torque: 0.8 Nm Connection cross-section:  , ,0.2 ... 4 mm² fine-wire,  , ,2 x (0.2 ... 2.5 mm²),  , ,0.2 ... 6 mm² fine-wire,  , ,2 x (0.2 ... 4 mm²) Type of enclosure: IP 20 in accordance with DIN EN 60529 Safety class: II, DIN EN 61140 compliant Norm B: 223/108/03441 Device protection: Overload and short-circuit protection Weight: 0.225 kg Manufacturer: ABB Reference no.: UD/S2.300.2 Note:Delivery costs and discounts are displayed clearly in the cart (click on icon cart symbol) depending on the currently selected payment methods, mode of shipment and value of goods as well as country and address. - UD/S 2.300.2

Price: 215.13 from Eibmarkt.COM